Sweet Yellow Corn Cobs in 1, 2 or 4 Piece Bags

XMSD frozen corn supply

Sweet Yellow Corn Cobs in 1, 2 or 4 Piece Bags

This sweet yellow corn item is specified as frozen whole cobs or cut cob sections, with inner bags of one, two or four pieces and a vacuum packing option. A 10 kg outer carton is listed. For a buyer planning a retail or foodservice range, the inner piece count matters as much as the cob length: it determines the unit handled by the store, kitchen or consumer and the number of bags inside a case.

Product and packing options

The following options come from the product specification. They show the range available for a packing discussion; a current sample and order specification should identify one cob form, size band and bag construction for the actual shipment.

The product is described as frozen sweet corn. The packaging option does not establish a cooking status, shelf-life term or ambient-storage condition.

Choose one, two or four pieces per inner bag

A one-piece bag can support a single-unit retail program or portion-controlled foodservice supply. It creates more inner units to print, count and handle in a case. Two pieces can suit a paired serving or a small family pack. Four pieces reduce the number of inner bags for the same piece count and may be more practical for a kitchen, catering operator or larger household product. These are handling choices, not promises about the net weight of each bag: whole cobs and short sections will differ in piece weight.

For a retail project, start with the sales unit the shopper will pick from the freezer. Then assess the bag dimensions against the chosen length band, seal area, label panel and barcode placement. A 12–14 cm cob will not occupy the same bag space as an 18–20 cm cob. If a pack contains multiple cobs, the appearance of the group should be checked in a sample bag so the printed unit reflects what arrives on the shelf.

A foodservice buyer may instead start with the number of servings opened at once. Smaller inner units can limit repeated handling of a large open bag; larger units can reduce packaging activity on a busy line. The right choice depends on the menu, frozen storage layout and preparation step. A case specification should state piece count, net weight, bag type and carton quantity together.

Match cob length to the pack

The whole-cob bands listed for this item are 12–14, 14–16, 16–18 and 18–20 cm. These bands give an importer a useful way to design a consistent shelf presentation or kitchen portion. A visible cob that is much longer than its companions can make a multi-piece bag look uneven; a shorter cob may need a different bag dimension or a different sales description. The length range selected for an order should appear on the agreed specification and sample record.

Short cob sections are a different form. The listed 3–5 and 5–7 cm sections can be assessed for prepared meals, side dishes or buffet service where a full ear is not wanted. Their piece count, cut quality and visible kernel condition need a separate approval. A bag of four short sections is not interchangeable with a bag of four full cobs even if both have the same count on the label.

A practical sample review can include cob length, cut-end appearance, kernel coverage, colour consistency and the condition after the buyer's normal preparation. The exact acceptance limits should be written in the purchase specification. The source table does not supply variety, Brix, defect tolerances or net weight per piece for this exact item, so those figures must come from the current offer rather than a general corn page.

Vacuum packing and frozen-chain approval

Vacuum packing appears as an option beside the one-, two- and four-piece inner bags. The buyer should evaluate the filled bag, seal quality and cob shape in a current sample. A vacuum-style bag may change the way a full cob sits in a retail freezer, and a cut section may need a different layout. The selected material and bag dimensions belong in the approved artwork and pack specification.

This is a frozen corn product. A vacuum bag by itself does not establish that the corn can be stored at room temperature or eaten without preparation. Storage instructions, cooking guidance, shelf-life dates and any processing statement must come from the actual technical sheet and consumer label. Those points are particularly important when a buyer sells the product in a retail channel where another vacuum-packed corn item might be a different prepared food.

The outer specification lists a 10 kg carton, but the number of inner bags per carton cannot be calculated from piece count alone because cob and section weights vary. The quotation should therefore state the chosen size, piece count, net inner weight, bags per carton and carton net weight. For a private-label project, include destination-language text, barcode and carton marks in the pack approval cycle.

Questions from frozen cob buyers

Can one bag contain whole cobs or cut sections?

Both forms appear in the product range, but they require different length and pack specifications. The order should identify one form and length band for each sales unit so label, carton and sample match.

Does vacuum packing change the storage route?

The packing option alone does not change the product's frozen identity. The approved label and technical sheet must describe the storage and preparation route for the offered lot.

How many inner bags are in a 10 kg carton?

The count depends on the selected cob length, piece weight and one-, two- or four-piece bag unit. The 10 kg outer weight does not establish a universal bag count. The case configuration belongs on the quotation and carton marking.

What documents matter for a private-label order?

The buyer should align the technical sheet, ingredient declaration, storage statement, label artwork, packing drawing and any destination-market documents. XMSD's certification and compliance information describes company support; facility and product scope for any certificate is checked separately.

Plan your sweet yellow corn cob pack

Share the whole-cob or cut-section length, inner piece count, preferred bag construction, destination and estimated volume. We can use that brief to align a sample, frozen product specification, package drawing, documentation and quotation.